Skip to main content

Koki Holdings Co.,Ltd.

Rotors for CR22N




New Rotor

  • Unique 6L Rotor model R9A2 & 1500PP Bottle (WM)
  • We proudly introduce the newly developed 1500PP Bottle (WM). We are the 1st manufacturer developed unique 1.5L triangular bottle for high-speed refrigerated centrifuge use. The unique 1.5 triangular bottle has a wide mouth (WM) so that it is easy to collect separated sample (pellet) and clean the bottle. We could minimize the size and weight of our new 6L capacity fixed angle rotor with 1.5L triangular bottle. Comparing with R7A fixed angle rotor (1L x 6 bottles) for large-capacity refrigerated centrifuge, R9A2 rotor is lighter than R7A rotor and R9A2 rotor can offer higher g force.

    R9A2 : 17.1 kg / 15,100 xg (8,500 rpm)
    R7A : 18.7 kg / 11,100 xg (7,000 rpm)

    R9A2 rotor and 1500PP bottle (WM) including its cap can be sterilized by autoclave (at 121C for 20 min.)
    4 sets 1500PP bottle (WM) including cap, cap support, inner cap and O-ring are supplied as standard accessories with R9A2 rotor.

    R9A2 & 1500PP Bottle
Model R9A2
Max. Speed (rpm) 8,500
Max.RCF (xg) 15,100
K-factor (at max. speed) 4,313
Max. Nominal Capacity 1,500ml x 4 bottles (6L)
Tube Cavity Angle 22º
Rotor Weight (kg) 17.1
Product No. 904374D0
  • Configuration of 1500PP Bottle (WM)
Part No. Description
S310087A 1500PP Bottle (WM) (4pcs/set : bottle only)
S310071B 1500AL Cap (2pcs/set : cap only)
S412932A Cap Support (4pcs/set : cap support only)
S412933A 1000 Inner Cap (WM) 2 (2pcs/set : inner cap only)
S412935A O-ring (10pcs/set : O-ring only)

Standard Rotor : Fixed Angle Rotor

Model
Part No.
CR22N For Tubes Standard Accessories
Max. Speed
(rpm)
Max. RCF
(xg)
Nominal
Capacity
(ml x tubes)
Tube dimensions
(dia. x mm)
Tube / Bottle
R22A6
904375D0
22,000 55,100 10 x 12 16 x 82 10PA bottle w/cap x 12
R22A4
904363D0
22,000 55,200 2 x 30 11 x 42 Micro tube
R21A2
904373D0
21,000 50,000 30 x 6 26 x 97 30PA bottle w/cap x 6
R20A2
904295D0
20,000 48,000 50 x 8 29 x 103 50PA tube x 8
R18A
904359D0
18,000 42,200 50 x 8 30 x 115 himac 50TC tube x 300
12,000 18,760 50 x 8 30 x 115 50ml culture tube
R15A
904360D0
15,000 32,300 50 x 10 30 x 115 himac 50TC tube x 300
12,000 20,670 50 x 10 30 x 115 50ml culture tube
11,000 17,380 15 x 10 17 x 120 15ml culture tube
R14A
904306D0
14,000 30,240 250 x 4 62 x 124 250PP bottle x 4
R13A
904366D0
13,000 26,400 250 x 6
11 x 6
62 x 124
16 x 82
250PP bottle x 6
R12A6
904357D0
12,000 22,500 500 x 4 73 x 163 500PA bottle x 4
R12A3
904325D0
12,000 23,800 250 x 6 62 x 124 250PP bottle x 6
R10A5
904365D1
10,000 18,900 500 x 6 69.5 x 169 500ml bottle (Nalgene™)
R10A3
904345D1
10,000 18,800 500 x 6 73 x 163 500PA bottle x 6
R9A2
904374D0
8,500 15,100 1,500 x 4 W126 x H175 1500PP Bottle (WM) x 4
R9A*
904364D0
9,000 15,300 1,000 x 4 98 x 168 1000PP Bottle (WM) x 4
  • The rotor marked with this icon can be sterilized by autoclave at 121ºC for 20 minutes.
  • Biosafety of the rotor marked with this icon was validated by an independent and a third party facility (Public Health England, Porton Down, UK). However, seal performance may be affected by improper operation and maintenance, such as deterioration of an o-ring.
  • Biosafety of the rotor marked with this icon was verified by our in-house test according to the procedure modified IEC61010-2-020 Annex AA, using Bacillus subtilis containing ≥ 1x10^6 spores/ml. However, seal performance may be affected by improper operation and maintenance, such as deterioration of an o-ring.
For details about adapters and tubes of each rotor, please refer to the rotor guide respectively.

Note :

*1
Tubes highlighted with Pink cell are commercially available on the market. Purchase directly from your local supplier.
*2
Nalgene™ is a registered trademark and the property of Thermo Fisher Scientific Inc.and its subsidiaries.
*3
1000PP/PC bottle (2) and conventional products available on the market cannot be used.
*4
R9A2 rotor is an exclusive model for CR22N. It cannot be used with our former models, such as CR-GⅢ, CR-GⅡ, CR-G and CR-F series.

Standard Rotor : Swinging Bucket Rotor

Model
Part No.
CR22N For Tubes Standard Accessories
Max. Speed
(rpm)
Max. RCF
(xg)
Nominal
Capacity
(ml x tubes)
Tube dimensions
(dia. x mm)
Tube / Bottle
R8S
904371D0
8,000 11,500 50 x 4 30 x 115 50ml culture tube
R5S4
904369D0
4,700 3,100 96DWx4
96MPx12
W128xD86xH90 96-hole microplate
96-hole deepwell plate
R4SS
904370D0
4,000 2,900 - -  
15x10S adapter
S308546A
4,000 2,860 15 x 40 16.5 x 110
15x8S adapter
S307334A
4,000 2,860 15 x 32 16.5 x 110
10x10SB adapter
S308695A
4,000 2,800 10 x 40 15.4 x 100
10x8S adapter
S307333A
4,000 2,860 10 x 32 13.2 x 100
5x8S adapter
S307332A
4,000 2,380 5 x 32 13.2 x 78
50x2S adapter
S308844A
3,500 2,120 50 x 8 35 x 100
15TCx6S adapter
S307335A
4,000 2,900 15 x 24 17 x 120
50TCx2S adapter
S307336A
4,000 2,860 50 x 8 30 x 115
R3S
904315D0
3,000 1,940 - -  
500PA tube
9S303830A
3,000 1,940 500 x 4 98 x 100
Tube rack BL
9336821A
3,000 1,870 10 x 120 12 x 120
Tube rack GR
9336822A
3,000 1,870 7 x 96 13-14 x 120
Tube rack YE
9336823A
3,000 1,870 15 x 72 16.5 x 120
Tube rack OR
9336824A
3,000 1,870 50 x 16 36.5 x 120
10 x 16 12 x 120
Tube rack BL (B)
9S307165A
3,000 1,870 10 x 120 12 x 120
Tube rack GR (B)
9S307167A
3,000 1,870 7 x 96 13-14 x 120
Tube rack YE (B)
9S307164A
3,000 1,870 15 x 72 16.5 x 120
Tube rack OR (B)
9S307166A
3,000 1,870 50 x 16 36.5 x 120
10 x 16 12 x 120
Tube rack 61x1
S303580A
3,000 1,800 225 x 4 Falcon™ culture tube* 225/175mlculture tube
175 x 4
Tube rack 17x10
S304528A
3,000 1,940 15 x 40 17 x 120 15ml culture tube
Tube rack 13.2x18
S304666A
3,000 1,800 7 x 72 ø13 vacuum blood collecting tube  
Tube rack 15.5x18
S304667A
3,000 1,800 10 x 72 ø15 vacuum blood collecting tube
50T7S adapter
S305213A
3,000 1,870 50 x 28 30 x 115 50ml culture tube
Tube rack 29.5x5(B)
S307253A
3,000 1,830 50 x 20 30 x 115 50ml culture tube †
M bucket
346977A
2,000 700 Microplate x 4pcs W128 x D86 xH10-30 96-hole microplate
MP bucket
S305521A
3,000 1,650 Microplate x 4pcs W128 x D86 xH10-50
  • The rotor marked with this icon can be sterilized by autoclave at 121ºC for 20 minutes.
  • Biosafety of the rotor marked with this icon was validated by an independent and a third party facility (Public Health England, Porton Down, UK). However, seal performance may be affected by improper operation and maintenance, such as deterioration of an o-ring.
  • Biosafety of the rotor marked with this icon was verified by our in-house test according to the procedure modified IEC61010-2-020 Annex AA, using Bacillus subtilis containing ≥ 1x10^6 spores/ml. However, seal performance may be affected by improper operation and maintenance, such as deterioration of an o-ring.
For details about adapters and tubes of each rotor, please refer to the rotor guide respectively.

Note :

*1
Tubes highlighted with Pink cell are commercially available on the market. Purchase directly from your local supplier.
*2
† Both 50ml free standing culture tubes and 50ml V-bottom culture tubes can be used.
*3
* Falcon™ is a registered trademark and the property of Becton, Dickinson and Company. For prevention of deformation, a cushion produced by Falcon (Falcon part No. 2090) is also required.

Made-to-Order Rotor : Fixed Angle Rotor

Model
Part No.
CR22N For Tubes Standard Accessories
Max. Speed
(rpm)
Max. RCF
(xg)
Nominal
Capacity
(ml x tubes)
Tube dimensions
(dia. x mm)
Tube / Bottle
R22A
904299D0
22,000
(21,000)
54,700
(49,800)
7 x 18 16 x 60 7PA tube x 18
R22A2
904300D0
22,000 51,200 50 x 6 29 x 103 50PA tube x 6
R21A
904301D0
21,000
(20,000)
53,600
(48,300)
11 x 16 16 x 82 11PA tube x 16
R19A
904303D0
19,000
(18,000)
45,600
(40,900)
80 x 6 38 x 104 80PA tube x 6
R17A Non-CE
904305D0
17,000
(16,000)
40,900
(32,600)
50 x 14 29 x 103 50PA tube x 14
R14A3
904322D0
14,000 29,100 100 x 10 38 x 104 80PA bottle x 10
R12A4
904327D0
12,000 23,800 2 x 72 11 x 41 Eppendorf® tube
  • The rotor marked with this icon can be sterilized by autoclave at 121ºC for 20 minutes.
  • Biosafety of the rotor marked with this icon was validated by an independent and a third party facility (Public Health England, Porton Down, UK). However, seal performance may be affected by improper operation and maintenance, such as deterioration of an o-ring.
  • Biosafety of the rotor marked with this icon was verified by our in-house test according to the procedure modified IEC61010-2-020 Annex AA, using Bacillus subtilis containing ≥ 1x10^6 spores/ml. However, seal performance may be affected by improper operation and maintenance, such as deterioration of an o-ring.
For details about adapters and tubes of each rotor, please refer to the rotor guide respectively.

Note :

*1
Tubes highlighted with Pink cell are commercially available on the market. Purchase directly from your local supplier.<
*2
Non-CE rotors cannot be used with CR22N (CE model), due to higher kinetic energy and rotor ID identification. Non-CE rotors are not available in EU and US/Canada market.
*3
Values in parentheses in the maximum speed and maximum RCF columns are those at which the rotor temperature can be cooled at 4ºC. The rotor temperature can be cooled at or below 15ºC at the maximum speed/RCF. (when room temperature is 25ºC)
*4
Eppendorfreg; is the registered trademark of Eppendorf AG, Germany.

Made-to-Order Rotor : Swinging Bucket Rotor

Model
Part No.
CR22N For Tubes Standard Accessories
Max. Speed
(rpm)
Max. RCF
(xg)
Nominal
Capacity
(ml x tubes)
Tube dimensions
(dia. x mm)
Tube / Bottle
R15S3
904339D0
15,000 28,700 11 x 4 16 x 82 11PA tube x 4
R10S
904312D0
10,000 16,470 50 x 4 29 x 103 50PA tube x 4
R7S
904313D0
7,000 9,420 250 x 4 62 x 124 250PP bottle x 4
R6S
904334D0
5,700 5,010 Microplate x 2pcs W128 x D86 x H10-55 96-hole microplate
2x48S adapter
S408787A
5,700 5,010 2 x 96 11 x 41 Micro tube
0.2x96MP adapter
S408786A
5,700 5,010 96-hole microplate for PCR - 96-hole microplate for PCR
For details about adapters and tubes of each rotor, please refer to the rotor guide respectively.

Note :

*1
Indicates tubes commercially available on the market. Purchase directly from your local supplier.

Made-to-Order Rotor : Special Sealed-type Fixed Angle Rotor

Model
Part No.
CR22N For Tubes Standard Accessories
Max. Speed
(rpm)
Max. RCF
(xg)
Nominal
Capacity
(ml x tubes)
Tube dimensions
(dia. x mm)
Tube / Bottle
R18AY
904328D0
18,000 38,800 50 x 8 29 x 103 50PA bottle x 8
R16AY
904329D0
16,000 32,300 80 x 6 38 x 104 80PA bottle x 6
R12AY
904330D0
12,000 22,200 250 x 4 62 x 124 250PP bottle x 4
R8AY
904331D0
8,000 12,000 500 x 6 73 x 163 500PA bottle x 6
For details about adapters and tubes of each rotor, please refer to the rotor guide respectively.

Made-to-Order Rotor : Special Rotors

Model
Part No.
CR22N For Tubes Standard Accessories
Max. Speed
(rpm)
Max. RCF
(xg)
Nominal
Capacity
(ml x tubes)
Tube dimensions
(dia. x mm)
Tube / Bottle
Horizontal Rotor
R10H
904348D0
10,000 13,000 Microplate x 4pcs W128 x D86 x H15-45 96-hole microplate
Soil Dehydration Rotor
R11D2
904353D0
11,000 15,800 (PF2.6-4.2) 100 x 4 50 x 51 Dehydration tool x 4
Continuous Flow Rotor
R18C* Non-CE
90131900
18,000 34,960 1,000 (500*1) - -
R18C seal unit (E) for CR22N (P/N S203036A), 18 batch unit for CR22N (P/N S217247A)
R13C* Non-CE
90432000
13,000 21,260 2,200 (1,600*1) - -
R13C seal unit (E) for CR22N (P/N S203037A), 13 batch unit for CR22N (P/N 217248A)
R10C* Non-CE
90432100
10,000 14,950 3,200 (2,300*1) - -
R10C seal unit (E) for CR22N (P/N S203038A), 10 batch unit for CR22N (P/N 217250A)
For details about adapters and tubes of each rotor, please refer to the rotor guide respectively.

Note :

*1
Tubes highlighted with Pink cell are commercially available on the market. Purchase directly from your local supplier.<
*2
Non-CE rotors cannot be used with CR22N (CE model), due to higher kinetic energy and rotor ID identification. Non-CE rotors are not available in EU and US/Canada market.
*3
* Collector units for R18C/R13C/R10C cannot be used on CR22N.
*4
*1 : Maximum pellet capacity (ml)